Skip to Content

Renofix 12 GRAY – MATERIAL FOR FINE TREATMENT

Ecologically friendly plaster, for fine treatment of walls and ceilings that require high quality finishing. This can be used for external and internal areas. The surface must be clean and dry. It is mixed with 5,5 to 6 litres of clean water. The material should be free of lumps. The minimum functional temperature is 5°C. Do not mix with other materials. Store in a dry place. Ensure the technical manual is followed.

Technical Sheet

ROFIX-12

READ MORE

Renofix 5

Is used for affixing insulation plates,as a meterial for levelling concrete surfaces and as an adhersive for levelling the Renotherm 50 thermal system.It can also be used as an adhesive for cement plaster on smooth concrete surfaces,stones,ceramic tiles and granite slabs.One sack of Renofix5 is mixed with 7 to 7,5 litres of clean wather for 2 minutes.The minimum functional temperature is 5C.
ROFIX-5

READ MORE

Renofix 50 white – POLYSTEROL GLUE & LEVELING MATERIAL

Styroporkleber It`s used for gluing Polisterol tiles ,wool stone and reinforces mesh and its
glue for stone tiles, marble granite and ceramic, as well as leveler material for thermic
system Renotherm W50,and adhesive for cement mortar polished concrete. A sack of
Renofix 50 is mixed with 7-7.5 l .clean water for 2 min. And 10 min before use is mixed
one more time. When used as adhesive Renofix 50 in full or striped surface,
with trowel put it on thermal plate and then,is attached on the wall. When it is used as
tile glue Renofix 50 it`s pulled by cogwheels trowel.Must be used within two hours,
Should not be mixed with other materials.Not appropriate for use below +5ºC.Must be kept dry.
Durability 6 months. Must be used confirm to technical manual.

READ MORE

Renofix 50 GRAY – POLYSTEROL GLUE & LEVELING MATERIAL

Styroporkleber It`s used for gluing Polisterol tiles ,wool stone and reinforces mesh and its
glue for stone tiles, marble granite and ceramic, as well as leveler material for thermic
system Renotherm W50,and adhesive for cement mortar polished concrete. A sack of
Renofix 50 is mixed with 7-7.5 l .clean water for 2 min. And 10 min before use is mixed
one more time. When used as adhesive Renofix 50 in full or striped surface,
with trowel put it on thermal plate and then,is attached on the wall. When it is used as
tile glue Renofix 50 it`s pulled by cogwheels trowel.Must be used within two hours,
Should not be mixed with other materials.Not appropriate for use below +5ºC.Must be kept dry.
Durability 6 months. Must be used confirm to technical manual.

READ MORE

Municipality of Tetovo

READ MORE