Skip to Content

Si-Si Fasade Paint


High quality facade paint mixed based on  Silicate & Silicon. Characterised with high covering properties, water resistance, water vapor diffusion and elasticity.

Composition:  Silicate, silicon resin and polymer dispersion, titan dioxide, calcium carbonate, silicate extender and other additives.

Application: Applied with brush, roller or spray. Workability temperature is recommended to be higher than 5°C. Dilute with 5-10% water and mixed well. Depending on outdoor conditions,drying time before second layer is 4-6 h and totally dry after 3 days. Surface must be clear and dry before the application.


Consumption: 0.20 kg / m²


Best before: 12 months in original package. Protect against frost!


Primer – Dispersive primer Coat

Dispersive Primer Renova

For impregnating exterior and interior walls; before applying the dispersive paint. As a primer between surfaces before applying the final coating.

Primer Preparation: Before applying dissolve the primer with clean water, in proportion 1 : 3 or 1 : 5 (1 unit material – 3 or 5 units water) depending on wall absorption capability.

Application: It can be applied with a paint roller or a brush in single layer only. After drying of the wall (2-3 hours) the surface is ready for painting.

Consumption: 0.2 1/m2 – depending on surface structure Storage: in dry places from +5°C to +35°C temp.

Durability: 18 months in original package


Kunstharzputz – Synthetic Resin – for exterior and interior

Synthetic Resin – for exterior and interior

Ready, paste resin – finish coat in many grains, textures and shades. Durable, heavy-tflammbarer, water vapor permeable and elastic structure for plaster facades and EIFS base coats.


Renofix 01 – Bоnding (BETONKONTAKT)


Plaster adhesive, bonding agent for plaster and cement plaster on smooth concrete surface. 20 kg primer must be diluted with water and ½ iter dan well with whisk

Stir, dan underline the wall or roll, after 24 hours you can apply.Do not work under temperature +5 ° C.


Renogrund – Primer for interior and exterior


Renogrund – Primer for interior and exterior.

Ready-pigmented primer with mineral fillers. Universal primer to equalize and additional waterproofing or Varies greatly absorbent substrates. Primer for subsequent coating with mineral, silicate or emulsion plasters. The Renogrund primer prepares the ground up so that it is ideally suited for the application of paste finishing coats.

This product is a baseline for previously plastered surfaces or basic plasters such as cement,gypsum or lime.It can be a bonding material for plastic plasters.24 hours after spreading Renogrund plastic plasters can be applied.

Consumption : 200g/m2pro coating on smooth surfaces.


Renocolor Classic


Composition: Water based dispersion paint Application: Final protection decorative inerior wall/celling paint. Before use dilute with cca 20% of water and stir well Storage: cca 0,25 L/m2

Storage: drying store at +5°C to +25°C.

Protect: against frost!

Durability: 18 month in original package


FasadenFarbe -Високoквалитетна боје за изузетне фасаде

Fasaden Farbe

This product is used for colouring external surfaces (facades) and internal walls plastered with Renofix structural/decorative plasters.It is applied with brush,roller or spray apparatus.