Used as a hydro-isolation material in bathrooms, on balconies and in pools; in old and new constructions, for walls significantly exposed to moisture (basements, laundry rooms).When applied by a trowel, a bag of the material requires 4-5 litres of water (6-6.5 litres of water when applied by a roller) and is to be mixed by a mixer for about 2 to 3 minutes, so that the material contains no clods. Stir shortly again after 10 minutes. The mixed material is applied onto the base with a trowel, brush or roller. The mixture is applied with a thickness of about 1-2 mm. Another layer of the same thickness is to be applied once again after 12 hours. In case a material of larger thickness is applied, this is done in several layers. The fresh mixture is applied within 2 hours. If a larger pressure by water is likely, we recommend several layers of hydro-isolation. It is not to be applied under direct sunlight. It is not to be mixed with other materials.

One-component cement waterproofing intended for creating a waterproof and vapor-resistant layer on mineral substrates. It is used as water protection in bathrooms, terraces, balconies, swimming pools, before laying ceramic tiles, etc. The product is flexible even at low temperatures. It is compatible with adhesives and wraps as a backcoat. A bag of 25 kg is mixed with 4-5 liters of clean water when working with a trowel and 6-6.5 liters of water when working with a brush or roller. Duration for work: 2 hours. It is finished with a brush. Store in a dry place. Durability: 6 months. It should not be used below a temperature of +5°C. Follow the technical instructions.