BASIC PROCESSING BASIC MORTAR (ROUGH)
Can be used on facades, internal walls and in rooms susceptible to moisture. For manual use, one sack of Renofix 60 is mixed using a mixer with 8-9 liters of clean water for two minutes. The wall area needs to be cleaned of dust, waste and grease. Minimum thickness of the layer should be 15 mm. Do not mix with other materials. Store in a dry place. Product expires after 6 months. The minimum functional temperature is 5°C. Ensure that the technical manual is followed.
Can be used as a spray plaster for all types of walls. Not to be used on soft foundation (porous concrete or hollow bricks). For manual application, one sack of Renofix 70 is mixed with 9 liters of water and spread with a trowel. The plaster can be sprayed with a mechanical applicator. With Renofix 70 you can cover 60% of the wall area. The wall area must be cleaned of dust, waste and grease. Store in a dry place. Product expires after 3 months. The minimum functional temperature is 5°C. Ensure that the technical manual is followed.
With this plaster you save time in applying the sand, cement, and the lime. The lime cement plaster is 0,3 mm. Plaster group II. It is mixed only with water and should never be mixed with other materials. It is used in manual plastering and construction. It is adequate for all renovation work. A sack of Renofix 75 is mixed with 10 liters of water. After 2 minutes have passed it ready for use. The wall area must be cleaned from dust, waste and grease. Store in a dry place. Product will expire after 3 months. The minimum functional temperature is 5°C. Ensure that the technical manual is followed.
For dry screed on cement foundations and lime sand with a 0-3 mm granulation. It improves the quality of your work. It is produced using modern technology and with it you gain elasticity in your cement layer. For manual treatment one sack of Renofix 970 is mixed with 4 liters of water. It can be mixed manually or automatically. Renofix 970 should be used within one hour of mixing. Then it has to be leveled and sanded. The minimum functional temperature is 5°C.